It can be frustrating when you need to get some tasks done, but you can’t get started. Some users who had upgraded or installed Windows 10 found that they couldn’t boot their system properly. If you’re experiencing the same problem, don’t worry because we can help you resolve it. Keep reading this article to learn how to fix Windows 10 boot issues.

Method 1: Ensuring that the POST Process Has Completed Successfully

In most cases, Windows 10 will not start if the POST process has not completed successfully. So, the next time you boot your computer, make sure that the POST bar fills up entirely until it disappears.

Method 2: Disconnecting External Devices

It is possible for hardware to interfere with the normal Windows boot process. As such, it is advisable to disconnect all the external devices, including your printer, video recorder, USB device, media card reader, and digital camera, among others. You can keep your monitor, mouse, and keyboard plugged. Once you’ve completed this step, you can disconnect your computer from the power outlet on the wall, then detach the laptop battery. Press the Power button for 10 to 15 seconds. After that, you can plug your unit into the power outlet and restart your computer.

Method 3: Finding the Right Solution for the Specific Error Message

Take note of the specific error message that shows up when you try to log into your system. One of the most common problems related to booting issues is the Blue Screen of Death (BSOD) error. So, if you want tofix Windows 10 won’t boot issue, you should learn how to troubleshoot BSOD errors.

Here at Auslogics, we have compiled a list of articles that will guide you on fixing the most common BSOD errors on Windows 10. You can click the links below to find the appropriate solution.

How to fix Bcmwl51.sys Blue Screen Errors (BSOD)?

NO_MORE_IRP_STACK_LOCATIONS Blue Screen Errors (0x00000035) fix<

How to fix ndis.sys Blue Screen Error on Windows?

Resolving tcpip.sys Blue Screen of Death on Windows 10/7/8

Method 4: Booting in Safe Mode

By booting into Safe Mode, you are able to launch your system with limited files and drivers. So, this option might help you start your system and appropriately troubleshoot the cause of the issue. To boot into Safe Mode, follow the instructions below:

  1. On your keyboard, press Windows Key+S.
  2. Type “Settings” (no quotes), then hit Enter.
  3. Select Update & Security.
  4. Go to the left-pane menu, then click Recovery.
  5. Click the Restart Now button under the Advanced Startup section.
  6. Once you get to the Choose an Option screen, select Troubleshoot.
  7. Click Advanced Options.
  8. Go to Startup Settings, then select Restart.
  9. Once your PC restarts, you will see a list of options.
  10. You can launch your unit in Safe Mode by pressing 4 or F4.

If you learn that the booting issue is not present while you’re in Safe Mode, then the issue has nothing to do with your basic drivers and default settings.

Steps to Exit Safe Mode:

  1. Right-click the Start button.
  2. From the list, select Run.
  3. Type “msconfig” (no quotes), then hit Enter. This should open the System Configuration window.
  4. Click the Boot tab.
  5. Make sure that the Safe Boot option box is not selected.
  6. Restart your PC.

Method 5: Resetting your Computer

You can also try resetting your PC to fix Windows 10 won’t boot issue. This will allow you to reinstall your system. To reset your device, follow the steps below:

  1. Click the Search icon on your taskbar.
  2. Type “Settings” (no quotes), then press Enter.
  3. Select Update & Security.
  4. Go to the left-pane menu, then choose Recovery.
  5. Click the Get Started button under the Reset this PC section.

Keep in mind that this option will delete all your personal files, apps and customizations. Only the default apps offered by Windows will be reinstalled on your computer.

Method 6: Performing a System Restore

If you can’t boot your system after upgrading to Windows 10, you can try to perform a system restore. It would help if you create a restore point in Safe Mode whenever you install new apps, Windows updates, or drivers. That said, you can go back to a restore point by following the instructions below:

  1. On your keyboard, press Windows Key+S.
  2. Type “System Restore” (no quotes).
  3. Select Create a Restore Point from the results.
  4. Submit your administrator password. If you are prompted to give permission, click Yes.
  5. The System Properties window should show up.
  6. Click the System Restore button, then select Next.
  7. Choose a restore point which you created before the problem occurred.
  8. Click Next, then select Finish.

Rolling your system back to a restore point shouldn’t affect your personal files. However, all the apps, updates, and drivers you installed after the restore point will be removed. Here’s another way of going back to a restore point:

  1. Click the Search icon on your taskbar.
  2. Type “control panel” (no quotes), then hit Enter.
  3. Go to the Search box, then type “Recovery” (no quotes).
  4. Select Recovery from the results.
  5. Click Open System Restore, then click Next.
  6. Select the appropriate restore point.
  7. Click Next, then click Finish.

Method 7: Performing Automatic Repair

To perform this method, you need to use a different computer. You must download Windows 10 ISO to make a Media Creation tool. Once you have the installation media, follow these instructions:

  1. Plug the Windows Installation media, then restart your PC. You will be prompted to press any key to boot from your USB drive or disk.
  2. Once the Install Windows page is up, select Repair Your Computer. This should launch Windows Recovery Environment (WinRE).
  3. Once you’re in WinRE, go to the Choose an Option screen, then follow this path:

Troubleshoot ->Advanced Options ->Automatic Repair

If you are not prompted to press any key to boot from your installation media, you must go to your BIOS settings and change the boot order. You must ensure that your system will start from your installation media. However, before you proceed, you must know that incorrectly changing the BIOS settings may prevent your PC from booting properly. So, proceed with caution.

Keep in mind that BIOS should only be updated when necessary. Here are the steps to changing the boot order:

  1. While your system is restarting, look for the instructions on how you can interrupt the regular startup process.
  2. Press the appropriate key for entering BIOS Setup Utility.
  3. Once you are inside BIOS Setup Utility, look for the Boot Options, Boot Order, or Boot tab.
  4. Go to Boot Order by using the arrow keys.
  5. Press Enter.
  6. Look for the removable device on which the Media Creation tool is installed.
  7. Drive that option upwards by using the arrow keys. Make sure that it becomes the first option in the Boot list.
  8. Press Enter.
  9. Now that you’ve changed your boot order sequence, press F10 to save the changes. This should also allow you to exit BIOS Setup Utility. After doing this, your PC will restart.
  10. Let the scan run for a couple of minutes to ensure that any malware infecting your PC is removed.
  11. Click Next, then select Repair your Computer.
  12. Select Windows 10 as the operating system you wish to repair.
  13. Click Next.
  14. Once you get to the Choose an Option screen, select Troubleshoot.
  15. Choose Advanced Options, then click Startup Repair or System Restore.

Once the repair process is complete, check if you can boot into your system properly.

Method 8: Booting in Safe Mode with Networking

Safe Mode with Networking allows you to boot Windows with the services and drivers necessary in accessing the Internet. This option also lets you get into other computers on the same network. To enter Safe Mode with Networking, follow the steps below:

  1. Restart your PC.
  2. Once you see the sign-in screen, hold the Shift key while clicking Power. Select Restart from the options.
  3. Your computer should restart to the Choose an Option screen.
  4. Follow this path:

Troubleshoot ->Advanced Options ->Startup Settings ->Restart

  1. You will see a list of options when your PC restarts. Select F5 or 5 for Safe Mode with Networking.

After entering Safe Mode with Networking, you should be able to run SFC and DISM scans. These will help you repair issues on your system that might be causing the booting problem. The System File Checker (SFC) allows you to check the protected system files automatically. It will also replace the incorrect versions with the ones Microsoft officially released. On the other hand, the Deployment Image Servicing and Management (DISM) tool fixes corrupted files in Windows Update and service packs.

How to Perform an SFC Scan

  1. Press Windows Key+S on your keyboard.
  2. Type “CMD” (no quotes).
  3. Right-click Command Prompt from the results, then select Run as Administrator.
  4. Type “sfc/scannow” (no quotes), then press Enter.
  5. Wait for the process to complete. After that, restart your PC.

How to Perform a DISM Scan

  1. Go to your taskbar and click the Search icon.
  2. Type “control panel” (no quotes).
  3. You will see Control Panel from the results. Right-click it, then select Run as Administrator.
  4. Type “Dism /Online /Cleanup-Image /RestoreHealth” (no quotes), then press Enter.
  5. Once the process is complete, restart your computer. Check if you can boot Windows 10 with no issues.

Pro Tip: It is possible that you’re just experiencing slower or longer system booting because of disk fragmentation. As such, we recommend defragging your files by using Auslogics Disk Defrag Pro. This tool will optimize file placement on your hard drive, ensuring that it can perform at maximum efficiency. This way, you will be able to boot Windows 10 with ease.

Which method did you use to resolve your Windows 10 booting issue?

Share it in the comments below!