Is your PC not running as fast as it used to? Does it take long to launch applications or load specific files? One possible cause may be that your PC has gotten too fragmented. Here’s how to use Auslogics Disk Defrag to fix this!

When you use your computer, Windows leaves fragments on your hard disk. When you try to open a file or software, these fragments make it take longer for the system to locate the data it needs.

That’s why you need to defragment your hard disk. Your hard disk’s data may have been disorganized over time, slowing down your computer’s performance.

However, with Auslogics Disk Defrag, you can reorganize and compact the data to its proper location. This detailed review will show you why you need the product and how it works.

Let’s begin.

Why Do You Need Auslogics Disk Defrag?

There are three key facts you should know about hard disks and why having Auslogics Disk Defrag should be a requirement:

1. Hard Disks Store Data in Chunks

Hard disks store data in chunks (or sectors), and each sector holds a set amount of data storage space (about 512 bytes). Think of the sector as a single pie slice on a single ring of the disk’s surface, much like the rings of trees.

2. Data is Stored in Specific Locations on the Disk

A small arm on the hard disk moves around from ring to ring. Then, finally, it moves its arm to the appropriate ring and waits for the desired sector to spin into view before accessing it.

3. Hard Disks Are Slow

Compared to the processing and memory speeds, it takes longer for the arm to move for a sector to spin into position.

Because hard disks are slow, it’s ideal for keeping data on the disk in sequential portions. That will reduce the amount of time spent moving the arm. For example, let’s say you’re putting a new program on a previously empty disk.

Since there is no data on the disk, the computer can safely place the application’s files in successive sectors on sequential rings. This is a time-saving method of storing information on a hard drive.

However, this effective method becomes more challenging for the disk as you continue to use the disk. What ends up happening is that the disk becomes full. Then you delete files to free up storage. And these deleted files are spread across the disk’s surface.

So whenever you install software or transfer a sizable file to the hard disk, it stores into these hundreds of scattered spaces. And that causes your PC to spend a lot of time loading them because the disk arm must move all over the surface.

That’s where Auslogics Disk Defrag comes in.

How Auslogics Disk Defrag Helps Your PC

Auslogics Disk Defrag is a free, fast, and reliable defragmentation tool for Windows. It helps you defragment your entire hard drive or individual files and folders.

The goal of the tool is to rearrange the file system. All files are placed in consecutive sectors on consecutive disk rings. It can take several hours to pick up and relocate thousands of files one by one on a hard disk, especially the slow ones.

That’s why, for ultimate speed and efficiency, use the Auslogics Disk Defrag tool instead of the standard Windows defragmenter.

What is Auslogics Free Disk Defrag?

Auslogics Disk Defrag Free is a fast and reliable defragmentation tool for Windows. This tool can help defragment your entire hard drive or individual files and folders.

The software works great with all modern versions of Microsoft Windows, including Windows 7, 8, 8.1, 10, and 11.

It can optimize your system by rearranging data on the disk to speed up access time, saving you time and money. It also includes an easy-to-use interface that allows you to manage your disk volumes with just one click.

Auslogics Free Disk Defrag Features

Auslogics Disk Defrag has numerous helpful features that can speed up your hard drive:

1. Analyze Your Hard Drive

The Auslogics Disk Defrag portable analyzes your hard drive to determine how fragmented it is. Then it offers suggestions on how to improve performance.

If the results show that your system has many fragmented files or areas, Auslogics Disk Defrag will automatically start optimizing them. That will store the files in one contiguous area on the hard drive instead of being spread out all over.

2. Boot Time Defragmentation

The boot time defragmentation speeds up your computer’s startup process by automatically running the program after booting up.

3. Scheduled Computer Scans

There are several scheduled computer scans that you can perform:

Scheduled System Scan.

The disk defragmenter will automatically check your hard drive for fragmentation and attempt to optimize it.

Scheduled file placement optimization.

This feature will attempt to automatically optimize the position of your frequently accessed files so that they are closer together on the disk. And that will speed up access time to these files.

Scheduled boot time defragmentation.

This option allows you to schedule periodic defragmentation at Windows startup or shutdown. That way, your system is continually optimized even before you use it.

4. Customizable Warnings

The Customizable Warnings alert you when you exceed specified disk space thresholds. That can help you know when to clean up your hard drive. You can also set different warnings for different users on the same computer.

That is helpful if multiple family members share one computer and each uses the PC differently. The feature is also helpful if you want certain users not to see warning messages.

For example, some teenagers may not care about keeping their computers clean. And that’s because they don’t mind waiting longer between reboots or having slower boot times.

Parents will appreciate this feature because it allows them to control what happens with their children’s computers.

You can also adjust the frequency of disk fragmentation warnings and set them to appear when your computer is idle or active.

5. Customizable Options

Auslogics Disk Defrag provides several options to personalize how the program works. You can change the default settings for these options using the “Options” menu.

You can access it by clicking on the “Options” button in the top left corner of your screen when Auslogics Disk Defrag is open.

View Options

The View Options allow you to view disk defragmentation statistics and information about your hard drive.

Schedule

It allows you to set up a schedule for automatic disk fragmentation cleanup based on time and day. Or other factors, such as whether your computer will be left idle. This option also enables automatic cleanup upon reboot.

That can fix any changes made when the PC is shut down after restarting it again.

Optimization Options

The Optimization Options control what types of files or folders should be checked when defragging an entire hard drive. These include “smaller than 1MB” (very small files), “larger than 1MB”(larger than very small), and “all files” (everything).

It also includes custom settings where you can choose specific file types from within your folders instead of relying solely on these categories.

Many other features are available in Auslogics Disk Defrag, including real-time monitoring capabilities for real-time results without waiting until completion. The program also supports multiple languages and solid-state drives (SSDs).

6. Context Menu Integration

You can access the Disk Defragmenter directly from the right-click context menu. Simply right-click on a file, folder, or drive and select “Defragment.” You can also use the built-in Windows context menu editor to create a defragmentation shortcut on your desktop.

Auslogics Disk Defrag Supports SSD Drives

Auslogics Disk Defrag supports SSD drives. Nowadays, people are switching from traditional HDDs (hard disk drives) to more efficient solid-state storage devices. However, SSDs have their set of issues.

Unlike HDDs that use mechanical parts for storage and retrieval operations, SSDs store data electronically in memory cells. That means there is no physical contact with other parts.

So defragging an SSD like an HDD won’t help to improve your PC performance. And that’s because there’s no “small arm” moving around inside an electric storage device’s memory cells when accessing data from multiple points across various locations.

What Auslogics Disk Defrag does is lower the number of write requests. And that’s because the main issue with SSD drives is the limited number of write cycles flash memory cells can handle.

So if you have an SSD drive, just “Enable SSD Optimization,” and the program will use specific SSD tools to defrag your PC.

Auslogics Defrag 11

However, you’ll need to purchase the pro version to access this feature.

Auslogics Disk Defrag Download

The Auslogics Disk Defrag download is fast and easy and only takes a few steps. Here’s how:

  1. Download the program from Auslogics official site. The size is only about 20MB which shouldn’t take much of your storage space.
  2. Install the software
  3. Run the program to start the defragmentation.

Note: If your computer uses an SSD, the program will alert you to switch to an “SSD Support Tab.” Since SSD differs from hard drives, Disk Defrag has unique tools to optimize your SSD for peak PC performance.

Auslogics Defrag

Is Auslogics Disk Defrag Safe?

Yes. Auslogics software is safe to use. The default Windows defrag utility is basic and doesn’t provide the same optimization level as Auslogics Disk Defrag free.

While this may be sufficient for some, Disk Defrag offers many more functions without being overwhelming. Besides that, numerous industry experts have recommended this product as one of the fastest and most efficient defraggers.

So you can safely use the Auslogics Disk Defrag without any problem!

Auslogics Disk Defrag Old Version

It’s not unusual for an app’s latest version to crash when installed on older computers. For example, the latest Auslogics Disk Defrag may not run on your device because of incompatibility with its operating system.

However, you won’t face any issues if your operating system is from Windows 7 to Windows 11. You can use the Auslogics Disk Defrag old version if your OS isn’t in this category.

But it’s best to upgrade to a higher version since most manufacturers are removing support for older versions.

Final Thoughts

As you can see, Auslogics Disk Defrag is a powerful tool that allows you to optimize your hard drive. If you’re looking for a way to keep your computer running smoothly, this program has everything you need.

Even if you are not tech-savvy, you’ll have no trouble using Auslogics Disk Defrag’s simple interface. It uses a color scale to indicate the current process state.

While running, the software won’t cause your computer to freeze, and you can cancel the operation anytime. What makes Auslogics Disk Defrag stand out is that it doesn’t prevent you from using your PC throughout the defragmentation process.

So you can expect your PC to perform at its best with Auslogics Disk Defrag.

Here is what you can do right now: Run a free scan with Disk Defrag and get your drives defragmented and optimized with a few clicks.

Free Scan for Disk Fragmentation
3.145.873
downloads
Compatible with:
Windows 10/11, Windows 7, Windows 8

Special offer. About Auslogics, uninstall instructions, EULA, Privacy Policy.